a review of biocompatible metal injection moulding process parameters for biomedical applications.mater sci eng c mater biol appl10.1016j..Image.Marked4.Image.Marked资料.pdfVIP

Materials Science and Engineering C 78 (2017) 1263–1276 Contents lists available at ScienceDirect Materials Science and Engineering C j ournal homepage: www.el sevier. com/l ocate/ ms ec Review A review of biocompatible metal injection moulding process parameters for biomedical applications M.F.F.A. Hamidi a, W.S.W. Harun b,⁎, M. Samykano c, S.A.C. Ghani b, Z. Ghazalli b, F. Ahmad d, A.B. Sulong e a Institute of Postgraduate Studies, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Kuantan, Pahang, Malaysia b Green Research for Advanced Materials Laboratory, Human Engineering Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia c Structural and Material Degradation Group, Faculty of Mechanical Engineering, Universiti Malaysia Pahang, 26600 Pekan, Pahang, Malaysia d Department of Mechanical Engineering, Universiti Teknologi PETRONAS, Malaysia e Department of Mechanical Materials Engineering, Faculty of Engineering Built Environment, Universiti Kebangsaan Malaysia, 43600 UKM, Bangi, Malaysia a r t i c l e i n f o a b s t r a c t Article history: Biocompatible metals have been revolutionizing the biomedical field, predominantly in human implant applica- Received 8 August 2016 tions, where these metals widely used as a substitute to or as function restoration of degenerated tissues or or- Received in revised form 30 April 2017 gans. Powder metallurgy techniques, in specific the metal injection moulding (MIM) process, have