led 色彩（ice 色彩）.docVIP

led 色彩（ice 色彩） This paper is contributed by paceypeng DOC documents may experience poor browsing on the WAP side. It is recommended that you select TXT first or download the source file to the local machine. LED is taken from Light Emitting Diode three Chinese acronym, translated as led, as the name suggests is a light emitting diode can convert electrical energy to light the characteristics of electronic devices with diode. At present, different light emitting diodes can emit different wavelengths from infrared to blue, and now the purple or even ultraviolet light-emitting diodes have been born. In addition to the blue light on the LED coated with phosphor, the blue light into white light white LED. Color and process: the color and process of LED: the materials that make LED are different, which can produce photons with different energy, which can control the wavelength of light emitted by LED, that is, spectrum or color. The first LED used in history is arsenic (As) gallium (Ga), and its positive PN junction voltage drop (VF, can be understood as light or working voltage) is 1.424V, and the emitted light is the infrared spectrum. Another common LED material is phosphor (P) gallium (Ga), whose positive PN junction voltage is 2.261V, and the emitted light is green. The two kinds of materials based on LED by G aAs1-xPx, the early industrial materials structure theory can be produced from infrared to any green wavelength range of LED, the percentage of phosphorus substituted subscript X represents arsenic. Generally, the wavelength color of LED can be determined by the PN junction pressure drop. Typical of them are GaAs0.6P0.4 red LED, orange light LED of GaAs0.35P0.65, yellow light LED of GaAs0.14P0.86 and so on. Because the manufacture uses the gallium, arsenic, phosphorus three kinds of elements, so commonly known as these LED for three element luminous tube. And GaN (GAN) blue LED, GaP green LED and GaAs infrared LED, known as the two element light-emitting tube.