一模两件落料冲孔弯曲切断复合模具设计论文[带图纸].doc

落料冲孔弯曲切断复合模具设计 摘 要 此论文主要阐述了我国模具工业的现状及发展趋势，是对落料冲孔弯曲切断复合模具做的总体设计。本设计运用了冲压工艺学和模具设计的基础知识，分析了该零件的技术要求与成型工艺，冲裁方案的确定；对毛坯的形状与尺寸进行计算，确定排样图，计算出压力中心；进行总力的计算后即可选择压力机；分析制件的特征后进行模具结构尺寸的设计，确定了模架的大小、模具内各零件的尺寸等；最后进行模具装配以及部装图的总体设计。本制件的一侧由弯曲工序来完成。考虑到弯曲成型要滞后与落料、冲孔工序，而且必须保证制件的尺寸精度，为此设计了一个活动凸模块和滚轮滑块结构。这套复合模极大地提高了生产率，工艺简便、结构合理且成型后保证了制件质量精度。 关键词 复合模具；冲压；结构尺寸；装配 Abstract This paper mainly expounds Chinas mold industry status and development trend of the parts of the process analysis, die structure design, mold assembly and the Ministry of loading map design. The compound die has greatly improved productivity, reasonable structure and shape, ensures quality and precision of workpieces. It is these few original scattered through the manufacturing process to achieve a unified composite die, so that process becomes simple. Blanking and punching bending cutting composite mold design and the use of the stamping process and die design of learning the basics of analysis of the components of the technical requirements and forming process, blanking the program to be confirmed; right shape and size of rough calculations to determine the nesting map, calculate the center of pressure; carried out immediately after the calculation of the total force option press; analyze the characteristics of workpiece die after the structural dimensions of the design, determine the size of the mold, mold size of various parts, etc.; the last to die assembly and installation diagram of the overall design of the Ministry. One side of the workpiece by the bending process to complete. Taking into account bending to lag and blanking, punching process,And must ensure that the dimensional accuracy of workpieces, for which an activity designed convex module and wheel slider structure. This paper is a blanking punching bending cutting the overall design of composite die to do. Key words composite mold; stamping; structure size; assembly 不要删除行尾的分节符，此行不会被打印目录 摘要 I Abstract II 第1章 绪论 1 1.1 我国模具技术的现状及发展趋势 1 1.2 冲压模的现状与发展趋势 2