基于有限元研究的喷丸式内孔强化设备分析-analysis of shot peening internal hole strengthening equipment based on finite element analysis.docxVIP

The Research of the Inner Hole Strengthening Equipment by Shot Peening Based on the Finite Element AnalysisAbstractThe localization of non-magnetic drill collars has become an urgent problem in the production of oil drilling with the development of Chinas oil industry. In addition to no magnetic, non-magnetic drill collar must have high strength, toughness and corrosion resistance. Shot peening technology can improve the fatigue strength of the stress concentration effectively, then improve the reliability and service life of components.According to non-magnetic drill collars production requirement, in this paper, the inner hole strengthening equipment by shot peening was developed, which is used to strengthen the surface of non-magnetic drill collars hole. This device is suitable for processing multi-species and large quantities of the drill collars series products, is easy to learn and effectively reduce the production costs and improve the market competitiveness of enterprises. This paper described the function principle and structure of the inner hole strengthening equipment by shot peening, and created its three-dimensional model by use of CAD software. Peening pipe was analyzed by using of ANSYS, then proposed the optimization scheme. And its nozzles structure was optimized based on the processing characteristics.In order to obtain the best effect of shot peening, the shot peening process parameters must be chosen reasonably. At present, the main method of obtaining reasonable shot peening process parameters is test, not only test cycle is long, but also the cost of research is increased. On the basis of realistic condition, this paper achieved the numerical simulation of its shot peening process parameters and studied the influence factors.This paper established the finite element model of shot peening by using of ANSYS/LS-DYNA, achieved the shot peening process of numerical simulation, analyzed the the various process parameters of shot peening a