整体立铣刀的磨削轨迹建模及其编程分析-modeling and programming analysis of grinding trajectory of integral end milling cutter.docxVIP

AbstractWith the continuous development of modern manufacturing, to meet the demand of tanglesome surface processing, high precision special rotary type cutter began to be widely used in automobile, mold, aerospace, machinery, electronics and other fields. Along with the high precision and special rotary tool widely used, the amount and type of it is more and more big, the cutter blade is becoming more and more complicated. In order to meet the requirement of precision complex blade cutting tool production, multi-axis linkage CNC tool grinding machine developed. In terms of hardware and software Multi-axis CNC tool grinder in the developed countries are relatively mature, but domestic did not have enough for this research, especially for CNC tool grinding machine control software system development, but rarely reference data. In view of the domestic manufacturer in urgent need of independent research and development of NC tool grinding machine, in response to market demand, this paper will research on NC tool grinding machine tool grinding automatic programming, which is part of operating software system.Firstly, CNC grinding trajectory modeling of integral flat-end mill. Grinding trajectory modeling of side edge and end edge to integral flat-end mill. Side edge grinding includes trajectory modeling of helical groove, rake face and flank face. End edge grinding includes trajectory modeling of rake face and flank face. During grinding trajectory modeling, given structure parameter of integral flat-end mill, use moving coordinate system and geometry describing to gain cutter location data of grinding.Secondly, CNC grinding processing method analysis and parametric programming of integral flat-end mill. Taking four-blade integral flat-end mill as an example, within actual production, analyze processing method of each working step of integral flat-end mill. Based on the trajectory modeling calculation and the structure of five-axis CNC tool grinder, use Matlab to parame