8 GW-PWD 作业经验.ppt

GW-PWD Pressure While Drilling System GW-PWD Pressure While Drilling System 1. Brief Introduction 2. Technical Specifications 3. Service Capability 4. Service Performance GW-PWD (pressure while drilling) can real time monitor the down hole inside and outside pressure of drill stem that on the top of bit, keep the mud density and ECD under the formation pressure, collapse pressure and the fracture pressure safe limitation. Avoid the risk caused from inaccurate down hole pressure prediction. It is also one of the key technologies of Managed Pressure Drilling and Under balance Drilling(MPD UBD), as the drilling operation reference for the precise pressure control. The GW-PWD service acquires circulating and static measurements of internal and annular pressure, axial and radial vibration, as well as axial and radial shock. 1. Brief Introduction MWD PWD Motor Bit Measured parameters：1.Annulus pressure 2.Down hole vibration 3.Down hole shock System Structure 2. Technical Specifications Downhole pressure parameters Tool size PWD-6 ?” PWD-8” Resolution 1 psi Accuracy ±8 psi Repeatability ±3 psi Measurement Range 0 - 20,000 psi Temperature Range 0 - 150°C 2. Technical Specifications Downhole vibration parameters 2. Technical Specifications Tool Size 6 ?”, 8” Axial Vibration Lateral Vibration Measure Range 0-50g (RMS, 30 Seconds) Resolution 0.05g (Max) Accuracy ±0.1g (Max) Data Output Range 0-15 (50g/3.125g) Axial Shock Lateral Shock Threshold 50g Unit Cps Data Output Range 0/1/2/3 Shock Risk Level Instruction 0 No Risk 1 Medium Risk 2 High Risk 3 Risk of Tool Failure 3.1 Research and development group International RD team (Houston RD Center): There are two internationally renowned scientists, 15 professional doctorate and many related professional technicians make the research and development for the while drilling tools and technology. Domestic RD team: 3