机械毕业外文翻译---混合机工作原理及其优化设计.doc

Mixer works, and optimize the design Cone mixer worksDSH series mixer barrel two asymmetric spiral rotation material upward the tumbler slow revolution movement; materials outside of the spiral, to varying degrees into the stud, so as to achieve full-circumferential orientation of the material constantly updated proliferation, has been mentioned the two materials in the upper center pockets again to confluence, the formation of an downward material flow, complementing the bottom of the vacancy to form a convection loop triple mixed results Cone mixer scope ofThe DSH cone mixer is widely used in the mixing of chemicals, pesticides, dyes, food, feed, building materials, rare earth powder and powder (solid - liquid). Wide adaptability machine mixed materials, heat-sensitive materials without overheating, the particulate material will not be pressure-fed and grinding, mixing between the proportion of different grain size materials will not produce points debris segregation phenomenon Cone mixer performance characteristicsThe tapered cylinder to adapt the no residues in the high demand of the hybrid materials.Gentle stirring speed will not cause fragile materials to produce damage.The stirring action of this machine better co-ordination role of the chemical reaction of the material.Coulter efficient mixer works:LDH PLOUGH efficient mixer mixing machine materials the role of the coulter, on the one hand along the cylinder wall effect to the radial turbulent, the other along the line direction of the coulter both sides of the surface splash. When the material flows through Flying, high-speed rotary knife strongly scatter the mixer under the composite action of the coulter, knife, so that raw material is convection, diffusion, and turning, resulting in a very short time to reach uniform mix. Coulter efficient mixer structural features:The machine is composed of four parts of the transmission machinery, horizontal cylinder, coulter, knife group. Rotary knife strong s