免烫树脂整理剂,洗可穿抗皱整理剂,环保无甲醛免烫剂,形态安定整理剂,行态记忆整理树脂1.docVIP

Formol-free Wash and wear finishing agent SRD787 无甲醛免烫整理剂SRD787 NEW Technical process: (1)Pre-cure process Fabric (surface PH=6.5-7) Padding (expression 60-80%, ambient temperature) Drying(80-100?C) Curing (160?C x 3min or 150 ?C x 7-8 min) Notice: You had better pre- washing the fabric, fabric become non alkali, clean and water content at right value. Drying had batter take air-lay drying in order to avoid some problems by drying cylinder such as migration, incrustation and hardish handling. Time and temperature deciding are depending on the thickness and consistency of fabric. As the temperature is 160, the time: above 32s finishing cotton needs 150s-180s, 21s-32s finishing cotton needs 160s-210s, below 21s finishing cotton needs 180s-240s. . (2)Post →cure process: Padding agent Dry ( reach water-retention value established) Pad-roll(cover roll with plastic film to retain water during transporting and lay) Cutting Ironing at high temperature( 175-185?C iron 30 sec) Curing(160?C x 3-6 min, or 150?C x 6-12 min, or 140?c,12-20 min ,time and temperature deciding are depend on the thickness and consistency of fabric) Advantage: Smooth, changeless size, durable tuck, but suture may be brought a little crease. Disadvantage: Cost high, before garments making or fabric roll transforming, it may be pre- formed, so that it difficult to eliminate creases that was made in the roll, as well as keep ironed pleat’s balance is no batter. (3) Garment finishing: Padding dyed fabric with the agent Centrifugal dehydration( raffinate will reuse) barrate dryer(60-80?C retain water content up to the 20%) Steamer ironing by iron machine (175-185?C, 30sec.) Curing (160?c x 3-6 min, 150?c x 6-12 min, or 140?c x12-30 min, time and temperature deciding are depend on the thickness and consistency of fabric) Cooling(ambient temperature) Packing Advantage: no need to worry about problem of pre-forming Disadvantage: cost hi