The Results module的的结果模块.pptVIP

Results Results Table of contents Section 1 Table of contents Section 2 OpeningThe Results module the Results module Section 3 Creating a results file in Equilib Section 4 Opening a results file and defining Axes Section 5 Selecting Species/Phases Section 6 Specifying the Graphical Output and displaying a Figure Section 7 Advanced output selection (phase distribution) Results generates graphs from Equilib Results (Equi*.Res) files. The Results module 1 Results The Results module 2 Click on Results in the main FactSage window. Results 3.0 Creating a Results file in Equilib The Results module is used to post-process the output of complex equilibrium calculations performed with Equilib. There are two methods by which this post-processing can be initiated: Immediately after the execution of the calculation or at a later stage. In both cases the Results Window in Equilib is used to start the appropriate action. In the present example it is assumed that the user has chosen the second method, i.e. he has stored the Equilib results in an Equi*.RES file and opened it later on in the Results module. All the actions with the Results module which are shown here can also be performed in Equilib by using the Equilib Results file option (see slide 3.2). Results Creating a Results file: the Equilib Menu window Input window for a carbothermic reduction of silica (SiO2 + 1.8 C) in the range 1800 T/K 3200 and p=1 atm. All data are taken from the FACT databases. 3.1 Results Creating a Results file: the Equilib Results window Results window for carbothermic reduction of silica (see previous slide) To create a results file: Output Equilib Results file Save Results file… 3.2 Enter a file number and a description Results Opening a results file in the Results program Now you can initiate the Results Program. Select and double-click on the file. Open a results file: File Open… 4.1 Results Results Window Summary of results, T(K) = 1800 to 3200 Click on ?Axes?