Ccnptroubleshooting学习笔记.docVIP

Ccnp troubleshooting 学习笔记 Question 1 FCAPS? Fault?Management?‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐‐?F Configuration?Management?‐‐‐‐‐‐‐?C Accounting?Management?‐‐‐‐‐‐‐‐‐‐?A Question 2 FCAPS–model defined by the International Organization for Standardization (ISO).ITIL– framework for it profTNM–network management model is the Telecommunications Standardization Sector’s (ITU-T)Cisco lifecycle–model is often referred to as the PPDIOO model Question 3 EEM?‐‐‐‐‐‐‐‐‐‐‐‐‐‐?CLI based for Management and MonitoringSDM?‐‐‐‐‐‐‐‐‐‐‐‐‐‐ provide a GUI for AdministrationFTP?‐‐‐‐‐‐‐‐‐‐‐‐‐‐ Used for Backup and restore 1)FCAPS is a network maintenance model defined by ISO. What does it stand for? A – Action ManagementB – Fault ManagementC – Configuration ManagementD – Protocol ManagementE – Security Management Answer: B C E (Fault, Configuration Security Management) Notice that A stands for Accounting, not Action. 2) Which alerts will be seen on the console when running the?command:?logging?console?warnings. A – warnings onlyB – warnings, notifications, error, debugging, informationalC – warnings, errors, critical, alerts, emergenciesD – notifications, warnings, errorsE – warnings, errors, critical, alerts Answer: C? (warning, critical, alert, emergencies) Explanation The Message Logging is divided into 8 levels as listed below Level Keyword Description 0 emergencies System is unusable 1 alerts Immediate action is needed 2 critical Critical conditions exist 3 errors Error conditions exist 4 warnings Warning conditions exist 5 notification Normal, but significant, conditions exist 6 informational Informational messages 7 debugging Debugging messages The highest level is level 0 (emergencies). The lowest level is level 7. If you specify a level with the “logging console level” command, that level and all the higher levels will be displayed. For example, by using the “logging console warnings” command, all the logging of emergencies, alerts, critical, errors, warnings will