布尔台矿提升方式设备选型设计.doc

摘要 本设计是关于布尔台矿主提升方式及设备的选型设计，首先对井田基本情况和国内外提升设备发展现状和趋势进行了概述，通过对提升能力分析计算，结合各提升方式的优缺点，本设计着重分析了箕斗提升和胶带输送机提升的可行性，最终确定了胶带输送机连续提升作为布尔台矿主斜井提升方式。对提升设备进行运行分析，选择其配套装置。进行提升设备总体布置。经过严谨的计算与校核，确定了带宽和带速，选取了符合强度要求的的胶带型号；通过计算各特性点的张力和圆周驱动力的计算，确定了电动机功率和型号，论述采用变频调速拖动方式对布尔台矿的顺利投入使用的必要性和重要性。自控液压拉紧装置部件bstract This design is about Buertai miners ways to enhance the design and equipment selection, the first of Ida basic situation at home and abroad to enhance equipment development status and trends outlined by the analysis and calculation of lifting capacity, combined with the advantages and disadvantages of each promotion methods, The design focuses on the feasibility of skip hoisting and lifting belt conveyor, and ultimately determine the belt conveyor continuously upgrade as Buertai miners inclined to enhance the way. To enhance equipment operation analysis, choose their supporting devices. Lifting equipment were overall layout. After rigorous calculation and verification, determine the bandwidth and belt speed, chosen in line with the strength requirements of the tape Model; by calculating each characteristic point of tension and circumferential driving force calculations to determine the motor power and model, discusses the use of frequency modulation Speed ??dragging large belt conveyor Buertai mine successfully put into use in the necessity and importance. After a reasonable analysis, choose the variable frequency drive of the drag way, since power is larger this design uses three dual-drive motor; ordinary drum strength is difficult to meet the strength requirements of the design choices of the heavy roller; according to the carrying capacity of selected roller, Zhang tight so choose a larger force-controlled hydraulic tensioning device, and select the backstop and brakes and other components in accordance with the size of the backstop force drawn last lifting equipment general arrangement and structure of the various parts. Key words: Belt conveyors, idlers, boost mode, the drum 目录