毕业设计某矿年处理4万吨铀矿石选矿厂设计.docVIP

完整CAD，三维模型设计图纸请联系本人，参见豆丁备注。 /lzj781219 毕业设计(论文) 题 目 江西某铀矿年处理4万吨铀矿石选矿厂设计 学院名称 核资源工程学院 指导教师 职 称 教 授 班 级 矿加091班 学 号 学生姓名 2013年 6 月 2日 某铀矿年处理4万吨铀矿石选矿厂设计 摘要：按照毕业设计任务书的要求，进行了江西某铀矿年处理4万吨铀矿石选矿厂设计，产品为铀精矿。 为了制定工艺成熟，生产可靠，经济效益高的设计方案，本设计参考了大量设计资料，然后根据矿山实际情况，确定了各车间合理的的工作制度，拟定了工艺流程，即采用三段一闭路的破碎流程，一段闭路的磨矿流程，一粗一精二扫的浮选流程，先浓缩后过滤的脱水流程。本设计对工艺流程中各个工艺指标进行了计算，包括破碎、筛分、磨矿、浮选（含矿浆流程）。对破碎、筛分、磨矿、分级、浮选、脱水及辅助设备进行了选择和计算，最终确定了所需的工艺设备。本设计还进行了厂房的总体布置，并进行了厂房内的设备配置。其中，粗碎、中细碎、筛分厂房分开布置。磨矿浮选共厂房布置，其中磨矿采用纵向配置，浮选机采用横向配置。浓缩机配置在露天，过滤机与精矿仓配置在厂房内。 关键词：铀矿 选矿厂设计 浮选 The dressing plant design of processing 40000 tons of uranium ore in xingjiang Abstract：According to the requirements of graduation design task book , the dressing plant processing 40000 tons of uranium ore has been designed. The designed product is the uranium concentrate. In order to develop the mature technology, reliable production, and high economic benefit of comprehensive plan, the design with reference to a large number of design information, and then according to the actual situation of mine, the reasonable working system was determined, the process, which uses three a closed-circuit crushing process, a closed-circuit grinding process, flotation technological process of crude a fine two sweep, two dehydration process first concentrate filtering. This design has carried on the computation to each process parameters, including crushing, screening, grinding, flotation (including the pulp flow). The crushing, screening, grinding, classification, flotation and dewatering equipment selection and calculation, and ultimately determine the process required equipment. This design also overall the arrangement of powerhouse, and the workshop equipment. According to the actual conditions of the plant, along the hillside, layout, coarse crushing, crushing