毕业设计A6140机床后托架加工工艺及夹具设计.docVIP

编号： 毕业设计说明书 题 目： CA6140机床后托架 加工工艺及夹具设计 学 院： 机电工程学院 专 业：机械设计制造及其自动化 学生姓名： 学 号： 指导教师： 职 称： 教授 题目类型：(理论研究 (实验研究 (工程设计 (工程技术研究 (软件开发 The machining process is to realize the product design, ensure the quality of products, save energy and reduce consumption of important means, and this subject research CA6140 lathe processing procedure after bracket. Based on the analysis of the drawing, understand the structure form, to specific technical requirements, which on the surface of each component to choose the appropriate processing method, and then develop reasonable technical process, in the formulation of the technological process, you need to make sure the process of installation location and the process need to work step, processing the process of locomotive and feed of the machine tool, cutting depth, spindle speed and cutting speed, this process of fixture, cutting tools and measuring tools, and go knife times and walk the length of the sword, finally calculated the process of basic time, auxiliary time and locate service time to verify achieve production requirements. Machine tool clamp design process equipment design is an important part of in the whole process of mechanical processing, clamping fixture in addition, fixed by processing parts, so need to choose corresponding parts to realize positioning; Also requires that the position precision processing parts, increase the processing productivity, so need to calculate the clamping device clamping force, and according to the requirements of the parts processing part. Keywords: process formulation；process；work step；machining allowance；time quotas；fixture；positioning scheme；clamping force 目 录 一 CA6140 机床后托架加工工艺 6 1.1 CA6140 机床后托架的作用 6 1.2 CA6140 机床后托架的工艺分析 6 1.3 CA6140 机床后托架的工艺要求及技术要求 7 1.4 确定后托架零件的生产类型及制造方法 7 1.5 确定各表面加工方案 7 1.5.1在选择各表面及孔的加工方法时，要综合考虑以下因素 7 1.5.2平面的加工 8 1.5.3 孔的