公共浴室太阳能热水系统的设计.pdf

公共浴室太阳能热水系统的设计 摘 要 作为目前太阳能利用方面的两项主要技术之一，太阳能热利用技术具有较高 的能量转换效率，系统简单可靠，技术较为成熟，成本则随着太阳能集热器生产 工艺的改进而不断降低，因而在工业和民用方面都得到了越来越广泛的应用。在 全社会面临节能减排艰巨任务之际，推动新能源技术的广泛应用具有十分重要的 意义；本设计针对特定的民用热负荷对象, 采用太阳能热水技术,按相关的设计标 准拟定出多个可行的太阳能水加热系统方案,并通过技术经济性的比较确定最佳 方案；选择太阳能集热器和配套循环水泵的型号及参数，考虑与辅助加热热源系 统的合理衔接，绘制热力系统图；并计算确定所需太阳能集热器的总面积和集热 循环水箱与供热水箱的容积、保温层厚度，根据安装场地特点确定集热器和水箱 的布置方案，对系统安装方案作抗风力的校核计算；分别绘制集热器和水箱的平 面与立面布置图。 关键词：太阳能热水系统，太阳能集热器，集热循环水箱 -I- 公共浴室太阳能热水系统的设计 Abstract As one of two major technology of the current utilization in solar energy, the use of solar thermal technology has a high energy conversion efficiency, the system is simple reliable and more mature technology, the cost of solar collectors with the production process of constant improvement lower, thus in the industrial and civilian aspects have been more widely used. Energy-saving society as a whole in the face of the arduous task of reducing emissions, and promote new energy technologies by the wider use of a very important significance of this design for a specific heat load of civilian targets, A solar water heating technology, according to the design of standards related to the preparation of a number of viable solar water heating system solutions and, through technical and economic comparison of the program to identify the best selection of solar collectors, and supporting the circulating pump models and parameters, and consider the auxiliary heat source heating system in a reasonable convergence, drawing heat chart, and calculate the required set of solar collector and the collector, the total area of recycling water tanks and heating the volume of water tanks, insulation thickness, according