计算机硬件及网络Moxa交换机三层路由配置课件.pptVIP

交换机2路由表 三层交换机 1 2.100 1.100 192.168.2.0 3.200 2.200 192.168.1.0 192.168.3.0 三层交换机 2 Confidential Moxa 三层应用 控制: 192.168.1.0 操作:192.168.2.0 管理: 192.168.3.0 Turbo Ring 高效内网 二层交换机: 支持同一VLAN的内部通信 三层交换机: 支持VLAN间的互相通信 Confidential 总结 三层交换机: 二层交换机+ 路由表 路由协议: -静态路由 : 固定的网络结构 -RIP : 可变的网络结构 Confidential Confidential This will be our agenda for today. We will start with talking with the different layer 3 switches offering How to enable routing and configure subnets The routing protocols in which we support -Static Route -RIP Route And lastly, Proxy ARP Both EDS-828 and PT-7828 have 4 Giga ports and 24 x 10/100Mbps ports. Each module can be fully copper, fiber or hybrid of copper and fiber module. ---------Take OFF------------ There most differentiating feature is there form factor. The PT series are industrially hardened rack-mount switches. The EDS series is normally mounted on DIN rails. (??) ------------------------------------------------------ Moxa Layer 3 switches are hardware based wire speed IP switching (routing) devices. What this translates to is performance. Being hardware based (unlike routers that are software based) and reaching full wire speed means that these switches are designed to take full advantage of the maximum possible throughput available for their given media. The current IP routing protocol supported by EDS-828 and PT-7828 are static route and Routing Information Protocol version 1 and version 2. Soon upcoming will be Open Shortest Path First (OSPF) is a dynamic routing protocol for use in Internet Protocol (IP) networks which will be implemented on EDS-828 and PT-7828. Moxa Layer 3 switch, the following protocol will be also available soon~ Multicast~ In multicasting, the Internet Group Management Protocol (IGMP) is the communications protocol used to manage the membership of Internet Protocol multicast groups. Its used to establish host memberships in particular multicast groups on a single network. The mechanisms of