通信英语整理资料.docVIP

首尾段 UNIT 1 The Principle of PCM PCM原理 Pcm is dependent on three separate operations, sampling, quantizing, and coding. Many different schemes for performing these three functions have evolved during recent years, and we shall describe the main ones. In these descriptions we shall see how a speech channel of telephone quality may be conveyed as a series of amplitude values, each value being represented, that is, coded as a sequence of 8 binary digits. Furthermore, we shall prove that a minimum theoretical sampling frequency of order 6.8 kilohertz(khz) is required to convey a voice channel occupying the range 300 HZ to 3.4 Khz. Practical equipments, however, normally use3 a sampling rate of 8 khz, and if 8-digits per sample value are used, the voice channel becomes represented by a stream of pulses with a repetition rate of 64khz. Fig .1-1 illustrates the sampling, quantizing, and coding processes. PCM的构成依赖于三个环节，即采样、量化和编码。近年来，人们对这三个环节的实现提出了许多不同的方案，我们将对其中的一些主要的方案进行讨论。在这些讨论中，我们会看到话路中的语声信号是如何转换成幅值序列的，而每个幅值又被编码，即以8位二进制数的序列表示。而且，我们将证明，为了转换频率范围为300HZ—3.4KHZ的话路信号，理论上最小采样频率须为6.8khz。但是，实际设备通常用8khz的采样速率，而如果每个样值用8位码的话，则话路是由一个重复速率为64khz的脉冲流来表示的。图1-1表示了采样、量化、编码的过程。 At the receive terminal a demultiplexer is arranged to separate the 8-digit sequences into the appropriate channels. The reader may ask, how does the demultiplexer know which group of 8-digits relates to channel 1,2, and so on? Clearly this is important! The problem is easily overcome by specifying a frame format, where at the start of each frame a unique sequence of pulses called the frame code, or synchronization word, is placed so at to identify the start of the frame. A circuit of the demultiplexer is arranged to detect the synchronization word, and thereby it knows that the next group of 8-digits corresponds to channel 1. The synchronization word reoccurs once again after the last channel has been received. 接收端设置了分路设备，将8位码序列分配到相应的话路中。读者也许会问，分路设备怎么会知道哪一组8位码对应于第1路、第2路及其他各路呢？显然这是很重要的。这个问题是很容易解决的。我们只要制定一个帧格式，即