论文车床主轴箱箱体左侧八个螺纹攻丝组合机床的设计.docVIP

摘要 洛阳理工学院毕业设计（论文） PAGE II PAGE I 车床主轴箱箱体左侧八个螺纹攻丝组合机床的设计 摘 要 本论文为加工车床主轴箱箱体左侧八个螺纹攻丝组合机床的设计。 根据加工工件的尺寸图和生产要求，合理的拟定设计方案，完成该机床各部件及系统的设计，主要包括加工工序的制定，主轴、刀具的选择，多轴箱和滑台的合理选用，主轴箱内传动系统的设定，夹具的设计，以及制定液压和控制系统。设计过程中，在满足设计要求的同时，应该注意相互间的合理配合，这样才能从整体上把握组合机床的性能和结构。 目前，组合机床的需求量很大，国家鼓励其出口。而国内汽车工业的迅速发展也势必导致各类零部件加工量的增大。因此，组合机床可多刀、多轴、多面、多工位加工的优点就显得尤为突出。 关键词：组合机床，攻丝，主轴，多轴箱，夹具  HATHE SPINDLE BOX ON THE LEFT 8-M8 THREAD TAPPING MACHINE TOOL DESIGN ABSTRACT According to the processing work piece dimensional drawing and the production request, reasonable draws up the design proposal, completes this engine bed various parts and the system design, mainly includes the processing working procedure the formulation, the main axle, the cutting tool choice, the multi-axle-boxes and the sliding table select reasonably, in headstock transmission system hypothesis, jig design, as well as formulation hydraulic pressure and control system. In the design process, while satisfies the design request, should pay attention to mutually the reasonable coordination, like this can grasp the aggregate machine-tool overall the performance and the structure. At present, the demand for the aggregate machine-tool is very big, the country encourages its exportation. But the rapid development of the domestic auto industry certainly will cause all kinds of spare parts to process the increase of quantity. KEY WORDS: dimensional，formulation，hypothesis，coordination，aggregate 前言 目　录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc214959278 前　言 PAGEREF _Toc214959278 \h 1 HYPERLINK \l _Toc214959279 第1章 毕业设计的目的和内容 PAGEREF _Toc214959279 \h 2 HYPERLINK \l _Toc214959280 1.1 通过毕业设计应达到的目的 PAGEREF _Toc214959280 \h 2 HYPERLINK \l _Toc214959280 1.1 毕业设计的有关内容及计算 PAGEREF _Toc214959280 \h 2 HYPERLINK \l _Toc214959284 第2章 组合机床的概述 4 HYPERLINK \l _Toc214959285 2.1 组合机床的特点 PAGEREF _Toc214959285 \h 4 HYPERLINK \l _Toc214959288 2.2 攻丝组合机床的结构方案 PAGEREF _Toc214959288 \h 5 HYPERLINK \l _Toc214959288 2.3 组合机床发展趋势 7 HYPERLINK \l _T