杜肯阀门执行器PUNEMAX-pnEumatiC-aCtuators-CP90.pdfVIP

Pneumatic Actuators -  Dessign Construction of Pneumatic Actuators 1 Actuator Body According to the different requirements, the extruded aluminum a oy ASTM6005 Body can be treated with hard anod- ized powder polyester painted (different colours is available such as blue, orange, ye ow etc.), PTFE or Nickel plated. 2 Pinion The pinion is high-precision and integrative, made from nicke ed-a oy steel, fu conform to the lastest standards standards of ISO5211, DIN3337, NAMUR.The dimensions can be customized and the stainless steel is available. 3 Pistons The twin rack pistons are made from Die-casting aluminum treated with Hard anodized or made from Cast steel with galvanization. Symmetric mounting position,long cycle life and fast operation, reversing rotation by simply inverting the pistons. 4 End caps Die-casting aluminum powder polyester painted in different colours ,PTFE or Nickel plated. 5 Travel adjustment The two independent external travel stop adjustment bolts can adjust ±5°at both open and close directions easily and precisely. 6 O-rings NBR rubber O-rings provide trouble-free operation at standard temperature ranges.For high and low temperature applications Viton or Silicone. 7 Bearings Guides Made from low friction,long-life compound material,to avoid the direct contact between metals. The maintenance and replacement are easy and convenient. 8 High performance springs Preloaded coating springs are made from the high quality material for resistant to corrosion and longer service life,which can be demounted safely and conveniently to satisfy different requirements of torque by changing quantity of springs. 9 Connection Air connection ,position indicator with NAMUR are convenient for mounting accessories such as solenoid valve,