折叠式级联运放的仿真_运放基本仿真步骤PPT课件教学幻灯片.pptVIP

ADE of OSR To add a model for the simulation From ADE-Setup-Model libraries To create a DC Sweep From ADE-Analyses-Choose-DC Waveform of OSR You can get the left waveform from page 8. OSR The output swing range is from 842.5mV to 4.381V. PS: OSR is dependence of applications and is not constant. Input Capacitor Where, VCM_IN is the input common voltage, VAC is AC voltage for AC Sweep. Test-Bench of CIN VCM_IN VAC ADE of CIN To add a model for the simulation From ADE-Setup-Model libraries To create a AC Sweep From ADE-Analyses-Choose-AC 折叠式级联运放的仿真 Create Schematic and Symbol in Spectre To create a symbol of a schematic: From Design-Create Cellview-From Cellview Open-Loop Differential Gain DC Sweep VP -VN (large signal) AC Sweep VP -VN with fixed frequency (small signal) Two methods of simulating Open-Loop Differential Gain is available in ADE (Analog Design Environment) Test-Bench of Open-Loop Differential Gain (method 1) DC Sweep VP -VN (large signal) In this method, VP=VCM_IN +x, and VN=VCM_IN-x Where, VCM_IN is the common voltage, x is a design variables. Setup VN Setup VP ADE of Open-Loop Differential Gain (method 1) To add a model for the simulation From ADE-Setup-Model libraries To create a DC Sweep From ADE-Analyses-Choose-DC Waveform of Open-Loop Differential Gain (method 1) Where, Differential Gain is 71.56dB To obtain VCOM_OUT From Calculator- Special Functions-Value VOUT -VCOM_OUT To obtain DC gain From Calculator- Special Functions-deriv Test-Bench of Open-Loop Differential Gain (method 2) AC Sweep VP -VN with fixed frequency Setup VN Setup VP In this method, VP=VCM_IN+ x +VAC, and VN=VCM_IN Where, VCM_IN is the input common voltage, x is a design variables, VAC is a AC voltage for AC Sweep. ADE of Open-Loop Differential Gain (method 2) To add a model for the simulation From ADE-Setup-Model libraries To create a AC Sweep From ADE-Analyses-Choose-AC Fixed Freq Waveform of Open-Loop Differential Gain (method 2) Differe