多边形单管通信塔极限承载力分析与其地震响应分析.pdfVIP

  • 9
  • 0
  • 约8.61万字
  • 约 76页
  • 2018-11-11 发布于江苏
  • 举报

多边形单管通信塔极限承载力分析与其地震响应分析.pdf

摘 要 单管通信塔以其简洁而富于变化的外形,便捷的连接方式,较小的基础面积等 特点,成为国外输电架设塔和通信塔的主要设计形式,近年来在我国开始大量使用, 拥有良好的发展前景。 单管通信塔是一种横截面相对较小,径厚比较大的细长构筑物,故受风荷载影 响较大,对单管塔进行风荷载作用下的极限承载力分析直接影响着结构安全性和使 用性。同时,地震是无法避免的自然灾害,对于结构的破坏是无法忽视的,为了避 免地震时结构破坏、遏止破坏引发的次灾害等恶劣事故的出现,尚需进行单管通信 塔地震响应分析。 本文首先阐述了单管塔的研究现状。对 比不同结构形式通信塔的力学性能和适 用性,介绍多边形单管通信塔的优越性。接着介绍了非线性理论及有限元非线性分 析理论,以此建立多边形单管通信塔模型。而后根据风荷载理论、随机振动理论, 运用 M.Shinozuka 方法仿真模拟得到了作用于多边形单管通信塔的多维相关脉动风 荷载时程样本曲线,并进行了检验。在掌握结构构造和熟悉国内外规范的相关规定 基础上,进行结构风荷载极限承载力分析。最后,本文运用 ANSYS 软件以地震谱、 地震波两种加载方式,对三种不同截面的多边形单管通信塔结构进行了地震谱分析 和瞬态分析。所做研究对今后进行多边形单管通信塔设计和应用具有重要意义。 关键词:多边形单管通信塔;非线性分析;有限元法 ;极限承载力;地震响应 Abstract Communication monopole with its concise and abound change the appearance, convenient connection modeless basal area, etc, become the main design form of transmission towers and communication tower in foreign, in recent years in China, has started extensive use of good prospects for development. Communication monopole is a relatively small cross-section, large diameter-thick slender structure, belong to the thin-walled, high-rise steel structure, so wind load influence is bigger, in the wind load, communication monopole the ultimate bearing capacity analyzing is directly affect the structure security and practicability. At the same time, the earthquake is unavoidable to nature disasters, structural damage is impossible to ignore, in order to avoid earthquake disasters, stem damage caused by the times of severe disaster accident, polygon communication monopole seismic response analysis is still need. This paper begins by describing monopole current situation.Contrast different communication monopole structural forms mechanical properties and

文档评论(0)

1亿VIP精品文档

相关文档