- 1、本文档共85页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
大型筒节轧制成形工艺的数值模拟与试验研究-材料加工工程专业论文
机械
机械科学研究总院硕士学位论文
万方数据
万方数据
ABSTRACT
Heavy shell is one of the key components in heavy pressure vessels, hydrogenation reactor and coal liquefaction reactor in the field of nuclear power, petrochemical and coal chemical equipment. Generally, heavy shell is used for bear pressure and it works at high temperature and corrosive environment for long-term. Free forging is the traditional process to produce heavy shells, however because the material utilization and productivity in free forging are low, heavy shells are facing difficulties in short supply. In this paper, the rolling forming process of heavy shell based on rolling was studied. The main contents are as follows:
Isothermal compression experiments were carried on 2.25Cr1Mo0.25V steel. The law between flow stress and deformation temperature and strain rate were obtained. The results showed that dynamic recrystallization was prone to occur at high temperature and low strain rate. It could be obtained through metallurgical experiments that as the deformation temperature increased, the average grain size increased, but the grain distribution was more uniform. As the strain rate increased, the average grain size decreased, but the grain distribution was less uniform.
Based on Avrami equation, mathematical model of dynamic recrystallization for 2.25Cr1Mo0.25V steel was established combining with isothermal compression experiments and metallographic experiments. This model was imported into Deform software to simulate the dynamic recrystallization of hot compression, which verified the mold was correct.
The heavy roll size is ?5258mm×?4086mm×3080mm. Rolling process simulation
was established using Deform-2D finite element platform, which was used to investigate the effects of rolling temperature, feed velocity, deformation degree and angular velocity. The results showed that rolling temperature exerted the most important effect on rolling force and average grain size. The second was deformation degree and angular vel
您可能关注的文档
- 大型国际电站锅炉总承包项目控制研究-项目管理专业论文.docx
- 大型地震传感器网络仿真平台实现-微电子学与固体电子学专业论文.docx
- 大型地震传感器网络仿真平台的实现-微电子学与固体电子学专业论文.docx
- 大型地下互通式立交隧道通风系统研究-桥梁与隧道工程专业论文.docx
- 大型基础设施项目融资及外债风险管理研究——以核电项目为例工商管理专业论文.docx
- 大型地下停车场环境设计研究-建筑设计及其理论专业论文.docx
- 大型壳体磁脉冲自动钻铆系统设计和仿真-材料加工工程专业论文.docx
- 大型复合板材恒压砂带磨削模糊自适应控制技术研究及应用-机械电子工程专业论文.docx
- 大型复合材料结构热压罐工艺温度场权衡设计-工程力学专业论文.docx
- 大型复杂动力总成部件的压铸模具温度场与应力场研究-材料加工工程专业论文.docx
文档评论(0)