风电全功率变流器的可靠性评估-电气工程专业论文.docxVIP

重庆大学硕士学位 重庆大学硕士学位论文 英文摘要 PAGE PAGE VI ABSTRACT The limit of conventional fossil energy promotes the development and application of renewable energy sources. Especially the growth of wind energy technology has played more and more important role in grid. The result of investigation indicates that converter shows low reliability in the wind turbine.Since power semiconductor device is a core component and also is one of the weakest components within the converter, so it is one of the most important factors affecting normal operation of wind turbine. Therefore, the reliability evaluation for wind energy converter and proposing some improvements are urgent to ensure normal and reliable work of wind power system. Since wind speed fluctuates randomly leading to the same fluctuation of the output power of wind turbine and device power loss, which causes the stochastic variation of junction temperature of device. However, the failure rate of device is mainly dependent on junction temperature of device and its variation. So this thesis uses the actual wind speed and air temperature to get the profile of junction temperature of device, combined with the output characteristic of wind turbine calculating the output power and power loss of converter. The reliability evaluation model of device is improved to adapt to evaluate the reliability of wind energy converter. Moreover, different models are used to evaluate the reliability of converter when the impact of different parameters on the converter reliability is considered. So the impact of some factors on the reliability of full size converter can be analyzed handily. On the basis of this, corresponding improvement measures are proposed to increase the reliability of wind energy converter. Because the research of reliability evaluation of wind energy converter is fewer currently, how the reliability of wind energy converter affected by some factors are also explored in the thesis. The main researches are as follows. In order