低成本高精度S参数测量系统的研究-电子与通信工程专业论文.docx

II II Abstract The research of low cost and high precision S parameter measurement system The research of low cost and high precision S parameter measurement system Abstract With the widely application of the wireless communication, the demand of RF components especially various kinds of antenna are increasing. Parameters consistency of RF components has caused concern in the industry. Network analyzer is the important equipment to measure the RF parameters; but its high price increases the cost of production. So design and development of the low cost and high precision S parameter measurement system has very important realistic significance. A set of S parameter automatic measurement system that it is suitable for production line is built in this paper. The S parameter measurement system consists of hardware and software. The hardware contains signal generator, RF-SPDT switch matrix, power meter, directional coupler and PC. The software consists of PC communication with signal generator, power meter and switch matrix and control them, as well as deal with the data. The design of directional coupler, communication between the equipments, and calibration technology for measurement parameters are the important points in this paper. The thesis is divided into five parts. The first part is introduces the principle of the network analyzer to measure S parameters, and discusses the possibility of using other instrument instead of network analyzer to measure the S parameter. The second part is discusses the design of system architecture including equipment selection, system connection and in the coming work, All these are based on the principle of the insertion loss and return loss test. The third part is discusses the main performance of the directional coupler, and proposes a new direction coupler structure. I simulate it using HFSS, and make a sample. The test report shows that the directional coupler can meet the III III Low cost and high precision S param