地震作用下钢筋混凝土梁的非线性有限元分析-防灾减灾工程及防护工程专业论文.docx

II II Abstract In recent years, the earthquake happened rather frequently, which caused a serious threat to human life and property. Under the action of seismic load, the role of buildings after the earthquake cycle, the all kinds of bearing capacity of the structures decline gradually. The damage accumulate constantly, when the damage reaches a certain extent, will lead to local damage of the building, and even cause the collapse of structure. After the earthquake happened, also cause flooding the plague and other secondary disasters, which will aggravate the damage of earthquake. Based on the theoretical calculation and the large general software ANSYS simulation, a combination of reinforced concrete beam under the action of the earthquake made a concrete analysis and research, the reinforced concrete beam under the action of the earthquake node made detailed analysis and research. According to the published paper of reinforced concrete structures in the beam end node load model and the loading system, the deformation of the beam end node figure, crack figure information of structural responses, stress contour diagram, etc. Finite element calculation results are in general accord with theoretical solution. Analysis, beam node failure mechanism and the stirrup on the beam of the impact of node failure.Shear frame damage calculation formula is proposed in this paper, and has carried on the structure of a five layers framework seismic action calculation and checking. A three layers of frame structure is carried out by ANSYS to solve under seismic action, the reinforced concrete beam under the action of earthquake is obtained to produce similar wave shape deformation, according to Code for seismic design of buildings（GB50011-2010）, by using of the finite element analysis of a simply supported beam, to study the beam cross section bearing capacity calculation.and beam outside in addition to the cross in the compression zone and the beam end parts are larger displacemen