沟槽醋酸纤维滤棒的开发-烟草科技.PDF

/ Tobacco Science Technology/Manufacturing Technology 20044 (201) (南通烟滤嘴实验工厂技术中心, 江苏省南通市孩儿巷北路73 号　226001) :醋酸纤维丝束;沟槽滤 ;烟气焦油量 2 :为提高卷烟滤嘴的过滤性能, 由醋酸纤维丝束滤芯、C 型沟槽纯纤维素纸(定量80 g/m )和成 形纸开发出醋酸纤维沟槽滤 。该滤 结构为沟槽滤 与普通醋纤滤 的二复合(1 ∶1)滤 。试验结 果表明,与普通醋纤滤嘴相比,C 型沟槽滤 的硬度可提高2～3 个百分点;在卷烟感官质量基本保持不 变的情况下, 对卷烟烟气的过滤性能显著提高, 同等条件下可再降低烟气焦油量2～3mg, 降低幅度为 13.66%～24.69%。 :TS457　:B　:1002-0861(2004)04-0017-04 Development of Grooved Acetate Filter Rod S ENG PEI_XIU Nantong Cigarette Filter Experiment Factory, Nantong 226001, Jiangsu, China Keywords:Diacetate cellulose tow;Grooved filter rod;Tar Abstract:In order to improve the filtration efficiency of cigarettefilter, a novel grooved filter rod consisted of diac- 2 etate cellulose tow filter core, pure cellulose tissue (basisweight 80 g/m )with C-shape grooves and plugwrap was developed.In fact, thatwas a dual filter rod composed of a regular diacetate tow rod section and an equal length grooved rod section.The results showed that the hardness of the groovedfilterwas 2 to 3 percentage points higher; the tar delivery was reduced to 75.31%-86.34%, whilekept cigarette tastebasicallyunchanged comparingwith regular acetate filter cigarette. 　　, 1　 , 。 , 。, , , 1。 。, , 、 [1] 。 。, :“ ”(110200201038)。 :(1965-), , , , 。 :2003-09-05　:2004-02-12