钢绳芯带式输送机设计研究及其CAD系统研发-机械工程专业论文.docxVIP

Jc,Lg理_T．大学专业学位硕士学位论文摘 Jc,Lg理_T．大学专业学位硕士学位论文 摘 要 钢绳芯带式输送机是一种新型物料运输工具，具有运输能力高成本低廉等优点，由 于带式输送机为采用大量标准部件的非标准机械产品，使用手工绘图和标准AutoCAD 进行设计，效率低，因此，必须研究一种基于CAD平台的钢绳芯带式输送机参数化设 计方法，以提高设计效率。 本文介绍了钢绳芯带式输送机的基本结构和主要特点，总结了钢绳芯带式输送机设 计中的主要技术要求，依据实际生产工况条件进行了钢绳芯带式输送机设计的计算和校 核分析．以输送机的输送能力为主要设计目标，研究了电机功率、输送带的设计方法。 根据输送机的不同的运行阶段，计算了滚筒绕入点和绕出点的张力。基于输送机运行时 的阻力计算，形成了运输机滚筒和托辊的设计方法。上述计算和分析为AUTO CAD参 数化设计提供了理论基础。 建立了钢绳芯带式输送机标准化设计的知识库，分析了软件结构模型，基于CAD 平台，应用VBA工具，编制了钢绳芯带式输送机参数化设计专用软件系统，缩短了设 计周期，减轻了工作强度，提高了设计效率。 关键词：钢绳芯带式输送机．参数化绘图，模块化设计。AutoOAD VSA 钢绳芯带式输送机设计研究及其CAD系统研发Research 钢绳芯带式输送机设计研究及其CAD系统研发 Research of steel—cored beR conveyors design and CAD system development Abstract Steel cord conveyor is a flew tool that transports material with the advantages ofIow-cost and hi曲transport capacity．As a non-standard product,and composed of many standard mechanical parts，it is ineffective to design steel cord conveyor with manual sketch or standard AutoCAD．Therefore，a new parametric design method based On AutoCAD platform must be researched to improve the design efficiency． This paper introduces the basic structure and major features，sBnls up main technique requirements in the steel cord belt conveyor design,calculates and identifies the design according to the actual working conditions for the steel cord belt conveyor．Aiming砒the conveyor transmission capacity，the methods t0 design conveyor driving power and motor power have been researched on．According to the operational phase of the conveyor,the tensions of the points that are rounded in and rounded out ale calcined．B船ing on the calculation of the resistance in the conveyor running process，a design method of transport roller Was created．The calcdafion and analysis above provide theoretical foundations for the AUTO CAD parametric design． Steel cord conveyor design of a standardized knowledge base，analysis of the software architecture model and AUTO CAD platform-based with VBA,establish a software system for the steel cord conveyor design parameters to