钢绳芯带式输送机静、动态选型设计及cad绘图系统-机械设计与理论专业论文.docxVIP

太原理工大学硕士研究生学位论文其花费的时间是不言而喻的。在设计过程中，只有将这些因素很好的协 太原理工大学硕士研究生学位论文 其花费的时间是不言而喻的。在设计过程中，只有将这些因素很好的协 调一致，达到最优匹配，才能设计出经济、可靠和实用的产品，才能实 现设计者的价值，才能提高市场的竞争力。同时，为了节省设计人员的 设计和绘图时间，提高产品的设计水平和效率，本课题还对如何实现在 AutoCAD环境下，利用VBA语言、MATLAB语言、DAO(数据访问 对象)访问Access数据库技术和AutoCAD提供的ActiveX技术，进行 计算机辅助选型设计和参数化绘图做了深入的研究。在CAD辅助选型 设计中，将整个选型设计过程分为传统选型设计的静态部分和考虑惯性 力时的动力学模型与连续模型选型设计的动态部分。在此基础上，实现 了钢绳芯带式输送机总图的参数化自动绘制。 关键词：带式输送机，动态研究，计算机辅助设计，参数化绘图，数据 库 II 太原理工大学硕士研究生学位论文THE 太原理工大学硕士研究生学位论文 THE STATIC AND DYNAMIC CAD SYSTEM OF THE STEEL—CORED BEIJ CONVEYORS AUTOⅣ队TIC DESIGN AND DR AⅥ呵NG ABSTRACT The steel-cored belt conveyors，comparing with the ordinary belt conveyors，could realizing long distance and large capacity transportation． As a new kind of transport tool，it has been popular and high developed form the middle of last century．It has the same working principle as the ordinary belt conveyors．Rencently，many kinds of iron and coal mines use the steel—cored belt conveyors，as the mining industry fast developing．With the development of modem industrial technology，the steel—cored belt conveyors will must have a wide application． The loads of the steel·cored belt conveyors’parts become a maximum point under high—speed condition and during take—up or stopping．In the situation，the rigid static theories could not be used to design conveyors， because of the parameters being different largely，and the products lose their dynamic characters．So，it should take the dynamic analysis on the take-up or stopping processes，when finding the maximum load positions．The thesis III 太原理工大学硕士研究生学位论文find 太原理工大学硕士研究生学位论文 find out the reality mathematic model of the steel—cored belt conveyors， through the dynamic analysis．Based on the model，adding the bounded and initial condition，the thesis get several continuous models and their results， which could be used in different surroundings．Then，the dynamic tension problems of the steel··cored belt conveyors that exist in take··up or stopping states are solved． As a kind of huge and co