高速电主轴非接触电磁加载及可靠性试验研究-机械工程专业论文.docxVIP

万方数据 Abstract Title: 5TUDY ON NON-CONTACT ELECTROMAGNETIC LOADING AND RELlABILlTY EXPERIMENT OF HIGH 5PEED MOTORIZED 5PINDLE Major: Mechanical Engineering  Name: Ronghua QIU 5upervisor: Prof. Hongzhao LlU signature Rf)J[qct ?f l;f signature 队叫议ω L ，Iá-  Abstract 1n order to improve the reliability of high speed motorized spindle，the reliability test of high speed motorized spindle is studied. The research contents are carried out，which includes three parts of simulation loading，data detection，processing of reliability test and reliability evaluation. For high speed motorized spindle，mechanical contact loading can be led to hard-solved problems such as wearing and vibration ，which makes it an unavailable choice as reliability test for long time and continuous loading. Therefore，loading on high speed motol泣ed spindle becomes the bottleneck of reIiability test，which restricts tbe development of the reliability test ofthe high-speed motorized spindle technology. ?ased on above reasons，the non-contact electromagnetic method is put forward，which are constituted by investigating and designing，carring out theoretical analysis and simulating 011 electromagl1etic 10adil1g perfonnances ，After that，the reliability test of high-speed grinding motorized spindle is conducted. Non-contact electromagnetic loading method and design process of the corresponding device are proposed ，as weII as its. loading device structure and magnetic circuit design which are the key technologies，while the loading disc and DC electromagnets are key sections to accomplish non-contact load by electromagnetic loading device. Due to the stress concentration ， radial electromagnetic loading focus on the permeability properties of the loading disk，and tangential electromagnetic loading focused on the conductivity of loading plate. So it is important to comparatively analyze magnetic properties ofvary?ng soft magnetic materials. It is also important to select materials with good