efpt过实验装置建模与控制-检测技术与自动化装置专业毕业论文.docxVIP

中南人学硕上学位论文 中南人学硕上学位论文 ABSTRACT ABSTRACT The objective of this paper is to establish a process control experimental system，which should be easily operated and make the control policy implement conveniently． In this paper,a computer monitor and a control system is developed based on the parameter fuzzy self-tuning PID control algorithm for the EFPT process comrol experiment equipment． A kind of parameter fuzzy sel f-tuning PID control algorithm is presented which combined the traditional PID algorithm and fuzzy algorithm．For the boiler temperature system，firstly a mathematic model was built from the step-response curve，and then the simulations have been done to compare with the PID control and parameter fuzzy self-tuning PID control separately by the simulink platform of Matlab． From the result the correctness and feasibility of parameter fuzzy self-tuning PID control was demonstrated．Then the parameter fuzzy self-tuning PID algorithm was used in the EFPT process control experiment equipment．From the curve of experiment，the feature of the lighter exceeding，no shaking，good stability,short time to reach the stable state，little error of stable state can be seen．So its dynamic and static characteristic is superior．Therefore it has verified that the feasibility of using parameter fuzzy self-tuning PID control in the temperature control system． Finally,the temperature control of parameter fuzzy self-tuning PID was implemented on a single chip microcomputer．The parameter fuzzy self-tuning PID control was applied to the temperature control system of EFPT process control experimental equipment，and it can improve the system’S control performance obviously Keywords process control，obj ect modeling，PID control，fuzzy control，parameter self-tuning； II 原创性声明本人声明，所呈交的学位论文是本人在导师指导下进行的研究工 原创性声明 本人声明，所呈交的学位论文是本人在导师指导下进行的研究工 作及取得的研究成果。尽我所知，除了文中特别加以标注和致谢的地 方外，论文不包含任何其他个人已经发表或撰写过的研究果，也不包 含为获得中