基于STM32平台的无线温度测量系统设计-电子与通信工程专业论文.docxVIP

Abstract At present, there are many kinds of method of temperature measurement, they mainly can be divided into two ways, contact temperature measurement and non-contact temperature measurement. Although contact temperature measurement has a relatively high accuracy , can measure environment temperature and the temperature of each part of the object to be detected, but for measuring the temperature of the liquid in the bottle to be detected, especially in cases of fast, accurate, and no-open bottles , this method is not suitable. That is to say, we need to adopt a method to measure object temperature without contacting it. Therefore, this design uses the infrared temperature measurement which is one of the important non-contact temperature measuring method. It takes advantage of the principle of the higher the temperature of the object, the more infrared radiation comes out, the stronger the infrared radiation energy to realize the non-contact temperature measurement. So we can use the value of liquid radiant energy to judge its temperature without opening the bottle. At the same time, considering the high power and calorific value of microwave platforms, if its temperature is too high, it will affect the proper function of the platform. So the real-time monitoring of microwave platform temperature is necessary, using non-contact temperature measurement can achieve this requirement. This design completed a wireless temperature measurement system based on STM32 platform construction, and completed the system hardware and software design, realized fast and accurate temperature measurement of the microwave platform and the liquid inside bottles. system adopts ARM chip STM32F103VCT6 as the main control chip, several DS18B20 digital temperature sensor, which precision can reach 0.5 ℃, to achieve one-line type multipoint temperature measurement of the microwave platform ,and uses MLX90614 infrared temperature sensor to conduct non-contact measuremen