基于plc和wincc的采煤机监控系统-检测技术与自动化装置专业论文.docxVIP

PAGE PAGE 10 SUPERVISORY CONTROL SYSTEM FOR SHEARER BASED ON PLC AND WINCC ABSTRACT Shearer is an important mining equipment, its working environment is very complex and harsh, and its operational status has importan t influence in safety of the coal mine and economic benefits. So to ensure its efficient operation, high reliability and long service life, condition monitoring system is indispensable. SCADA system combined with IT technology, DCS and PLC industrial cont rol technology in one, it is an effective means to monitor the equipment,control and schedule the production process.If we apply SCADA system to the operation of shearer production, we can achieve the automatic monitoring of the the shearer work process, reduce the burden on the operator. It plays an irreplaceable role to improve the production efficiency. The issues of article is shearer production process.On the based of modular design concept, we used industrial control technology, features powerful configuration software and fieldbus technology to design a monitor system.The system is based on WinCC PC. It achieved many functions.Such as data collection, parameter adjustment, device control and signal alarm.It provided a friendly HMI interface for industrial site. During the specific design process,we focus studying on the key issues of the local monitoring system, and propose solutions, including: Combined with a shearer production process control requirements,comed up with the overall architecture of the monitoring system and the part of the implementation. For the traction motor speed range is not wide and the control accuracy is not high,used direct torque control technology to achieve the traction motor speed, and the direct torque control system is built by MATLAB simulation. To design the local monitoring system based on Simatic S7 -300 PLC andcomplete the hardware configuration and software design. To design the monitor screen of Shearer production progress by WinCCsoftware, realize