《摩托车支撑架的模具设计及其加工工艺初步分析与探讨》-毕业论文.docVIP

沈阳工业大学硕士学位论文格式规范 PAGE - - 精品 摘 要 金属加工是工程学的一个分支，研究如何通过塑形成型、机械加工、焊接、铸造过程来制造金属零件和构件。当代工作部门中，冲压件所占的比重都相当大。以前用过的铸造锻造等加工方法制造的零件，现在已被质量轻、刚度好的冲压件所代替。通过冲压加工大大提高了生产率，降低了成本。可以说，如果在生产中不广泛采用冲压工艺，许多工业部门的产品要提高生产率、提高质量、降低成本、进行产品的更新换代是难以实现的。模具作为一种高附加值的技术密集产品，它的技术水平已经成为衡量一个国家制造水平的重要评价标准之一。 本课题对摩托车支撑架的模具设计及其加工工艺进行了初步分析与探讨，以此设计出了本文所阐述的支撑架的模具。首先对三种冲压方案进行了分析，最后采用三道工序完成冲压。然后进行了冲压及弯曲的变形过程分析，以工件在加工过程中变形的分析为基础进行冲压及弯曲工艺计算，以工艺计算得出的结果选择所要的设备和需要设计的零件等。例如：压力机，模座等。在选择零件时，根据实际情况尽力使所选用的零件能够整体配合。最后，把所设计好的零件用Solidworks绘制出来并组装成装配图，并绘制出零件和装配图的工程图。本文同时制定了主要模具零件的加工工艺方法，制定了凸模，凹模的加工工艺方案。 关键词：冲压；模具设计；弯曲 精品 Abstract Metal processing is a branch engineering science, which deals with the manufacturing of metallic parts and structures through the processes of plastic forming, machining, welding and casting.In contemporary departments, Stamping has a quite large share . light weight, stiffness good stamping parts have replaced Foundry and forging processing and other manufacturing component which was used formerly. It has greatly enhanced productivity and reduced cost by using stamping . It can be said that if the production is not widely used stamping process, Many products in the industrial sector to improve productivity, improved quality, lower costs, product updates will be hard to achieve. Mould as a high value-added, technology-intensive products. It has become an important evaluation criterion standard technology for measuring a countrys level of manufacturing. The article did early further analysis and discussion motorcycle support frame mold design and processing technology. This design described in the paper, covered the side of the bending die. First the stamping scheme has carried out analysis on the three kinds, Adopt three working procedure to accomplish stamping finally. Then I did stamping and bending deformation process analysis, on the basis of the workpiece machining deformation process analysis we can carry out the stamping and bending technology calculation.In terms of the results to c