塑料轴承盖模具设计.docVIP

PAGE \* MERGEFORMAT 1 PAGE \* MERGEFORMAT 1 PAGE \* MERGEFORMAT 3 PAGE \* MERGEFORMAT 3 摘要 这篇论文是关于轴承盖的塑料模具设计，主要内容包括塑件材料的分析，结构工艺分析，注塑机的选择，运水系统的布置，成型设备的确定，分型面的选择，浇注系统的设计，型腔的设计，推出机构的设计和合模导向机构的设计。 在正确分析塑件工艺特点和塑料的工艺之后，使用AutoCAD、UGX8.0等电脑辅助软件来进行模具设计和制造，产品的质量分析。塑料件模具设计，依据自由精度，利用AutoCAD、UGX8.0来设计和计算注射模的成型零部件，浇注系统，运水机构，和脱模机构等等。 关键词:分型面；推出机构；浇注系统；合模导向机构； Abstract This paper is about the bearing cover plastic mold design, the analysis of the main contents include plastic materials, process analysis, structure. The choice of injection molding machine, water system, the determination of molding equipment, the parting surface selection, gating system design, mold design, launch mechanism design and die design of steering mechanism. In the technological characteristics of plastics article of correct analysis and plastic process, using AutoCAD and UGX8.0 computer aided software for mold design and manufacturing, the quality of the product analysis. Precision plastic mold design, on the basis of freedom, the use of AutoCAD, UGX8.0 to design and calculate the forming parts of injection mould, casting system, water body, and demoulding mechanism, and so on. Key words: parting surface; Launch agencies; Gating system; Clamping oriented institutions; 目录 TOC \o 1-2 \h \u HYPERLINK \l _Toc25818 摘要 PAGEREF _Toc25818 I HYPERLINK \l _Toc26768 1.任务书设计 PAGEREF _Toc26768 1 HYPERLINK \l _Toc14735 2.塑件成型工艺分析 PAGEREF _Toc14735 2 HYPERLINK \l _Toc30241 2.1塑件材料分析 PAGEREF _Toc30241 2 HYPERLINK \l _Toc9709 2.2 结构工艺分析 PAGEREF _Toc9709 2 HYPERLINK \l _Toc18801 2.3 注塑机的选择 PAGEREF _Toc18801 3 HYPERLINK \l _Toc23512 2.4运水系统的布置 PAGEREF _Toc23512 4 HYPERLINK \l _Toc11452 2.5确定成型设备 PAGEREF _Toc11452 4 HYPERLINK \l _Toc25849 3.分型面的选择及浇注系统的设计 PAGEREF _Toc25849 6 HYPERLINK \l _Toc12786 3.1分型面的选择 PAGEREF _Toc12786 6 HYPERLINK \l _Toc18090 3.2 浇注系统的设计 PAGEREF _Toc18090 7 HYPERLINK \l _Toc16269 4.模具设计的方案论证 PAGEREF _Toc16269 8 HYPERLINK \l _Toc29170 4.1型腔的布局 PAGEREF _Toc29170