基于I.MX27的嵌入式系统硬件平台设计与实现通信与电子工程专业论文.docxVIP

Abstract The 32-bit embedded system is in the rapid development in the past 10 years, the popularity of a variety of high-speed interface, the hardware cost of the rapid goes down, as well as the growing demand for multi-purpose applications, embedded applications gushing out, can be expected in the near future embedded application will be more and more areas of life to a qualitative leap. The application of embedded network-oriented design and multi-media needs are the trends. The design of the embedded processor provide high-performance video processing capabilities and a variety of signal acquisition interface, and the expansion of a variety of common high-speed communications interfaces, to achieve a high-performance low-cost network-embedded hardware platforms. In this paper, some kinds of communication applications, as well as the background to deal with video compression, and the principle of the status quo of the two-pronged approach, the application of embedded systems development technology, the high-performance ARM I.MX27 from FREESCALE, has a video co-CPU for the realization of the core with high-performance video processing capacity of network application platform. ARM chip with video co-CPU compared to the general video devices specially designed for the ARM on-chip video processing circuitry that can quickly access the mainstream of the development of video decoder chips for video applications; compared to the general FPGA devices, offers a wide range of applications for higher performance and handling Shorter development cycle. With a variety of network interface ARM, compared to the use of the expansion bus to provide chip interface applications, as well as cost-performance advantage, as well as more rapid and stable development potential. As a result, using I.MX27 design and development of embedded platform is an ideal choice. Keywords Embeded, Video capture, Video coded and de-codec, Ethernet, USB 目 录 摘要 ...................................