基于csp工艺30crmo钢再结晶研究-材料科学与工程专业论文.docxVIP

万方数据 万方数据 Abstract Medium high-carbon steel is applied wildly in varieties of industries, such as aviation, electronics, mechanics and automobile for its excellent mechanical properties. So far, China can produce medium high-carbon steel mainly depending on traditional technology and the product has some shortcomings, such as inhomogeneous composition, surface decarbonization, poor flatness etc. CSP process possesses a series of advantages like fast solidification, small composition segregation and high yield rate and it can notably improve shortcomings exist in traditional process. So it’s significant to explore medium high-carbon steel technology based on CSP process. In this article, 30CrMo steel produced by the CSP mill of WISCO is chosen as representative to analyze its dynamic and static recrystallization rules by making single-pass and double-pass thermal simulation experiments under different deformation conditions. And following conclusions are obtained: Stress-strain curves of single-pass thermal simulation experiments are measured to calculate deformation activity energy of dynamic recrystallization, and then Z parameter equation is built, flow stress-strain model of high temperature austenitic area, grain size model and kinetic model of dynamic recrystallization are established; Stress-strain curves of double-pass thermal simulation experiments are measured and used to calculate softening ratio by 2% stress compensation method to investigate effects of different deformation conditions on static recrystallization; deformation activity energy of static recrystallization is calculated and finally the kinetic model of dynamic recrystallization is established. Keywords：Medium High-Carbon Steel; 30CrMo; CSP Process; Recrystallization II 目 录 摘 要................................................................................................................................ I Abstract............................................................................