基于flac3d对白云鄂博铁矿主矿南帮边坡稳定性分析及治理措施-矿业工程专业论文.docxVIP

内蒙古科技大学硕士学位论文 内蒙古科技大学硕士学位论文 Abstract The South part of iron ore stope primary closed loop has been formed in BAYAN OBO , and has entered the furrow mining, more than 1626 m has on the slope, and shows slope height over 80 meters; From the exposed slope situation, The lithology and structure is complex, fault fracture zone and dykes are more exposed in a large width and make the slope toward similar tendency to erect or anti-dumping, leading to negative slope stability on stairs,it is so obvious to slump and toppling slope relying on stairs that has seriously threatened to the safety production.Deep mining be designed in accordance with the near the boundary and the overall stability of the slope near the borderis currently facing major problems.Therefore, Itis the main purpose and task of this thesis work which Accuratelygrasp the rock slope in open-pit mining geological conditions of deep concave, to analyze the stability of slope, to make rational treatment scheme according to the actual situation. First of all ,visiting the mine ,collecting field data, based on field data and rock mechanics parameters FLAC3D build three-dimensional geological model of the displacement of the slope of the stress as well as digital simulation of plastic zone are in a natural state and storm conditions, After a comprehensive analysis,(1) Overall displacement of the maximum slope of96mm, the displacement from the bottom up gradually to increase, Displacement obviously occurred in two fault cut the upper part of the body, namely F17 and F15 fault. Deformation of slope displacement increase gradually from bottom to top, the east down 1230 m platform, finally the west slope deformation stretch to 1346 m platform. 1230 m and 1346 m platform at the bottom of the slope displacement approximation is equal to zero, this did not happen the slope integrity mobile can be deduced. (2) Deep displacement of slope is opposite bigger, to gradually decrease. Due to the smaller values of the displacem