基于adams的摆式剪切机的运动学及动力学分析-机械工程专业论文.docxVIP

内蒙 内蒙古科技大学硕士学位论文 Third,to set the various parameters and the constraint of vice in ADAMS above all. Setting the simulation component of driving accord to the production practice of the driver, the swing-type plate shear has two power, and need providing with a driving for the eccentric crankshaft and cylinder,to obtain the state of motion and shear properties of each component.To change the eccentric crankshaft turning clockwise reversal, and comparative the state and shear properties of movement of each member for positive and reverse drive.Do the analysis from the kinematic direction, modifiy the constraint vice of simulation model, to meet the conditions on the kinetics. Analysising shear force of shear machine by theoretical, then applied in shear blade during motion process.And applied contact force on the crankshaft and swing frame contact position, dynamics analysis of each component of the force, energy change, in addition to study the contact force effection of different gap for positive and reverse rotation,then comparative the different between them, thus obtains the effect of adjusting eccentric crankshaft on properties of swing-type plate shear. This paper discusses the swing-type plate shear machine and analysis and comparitive the effects of positive and reverse inversion of all aspects of kinematics and dynamics do on the swing-type plate shear ,learn to change the eccentric crankshaft steering will not reduce the quality of shear swing-type plate shear, and have small effection on each members force and contact force of the eccentric and pendulum ,thus the steering adjustment can play a role in improving the copper side wear. Keywords：Swing-type plate shear ; Kinematics; Dynamics ;ADAMS ; Different conditions III I I 目 录 摘 要 I Abstract II 1. 绪 论 1 1.1 剪切机在我国的发展历程 1 1.2 剪切机的分类 1 1.3 剪切机的研究发展 3 1.3.1 剪切机的国内外研究和发展现状 3 1.3.2 剪切机在国外的研究现状 4 1.4 课题研究背景和目的 5 1.5 研究内容 7 1.6 本章小结 7 2. 摆式剪切机工作原理和参数的确定 8 2.1 摆式剪切机的组成