基于arm7的多路生理信号监护系统的设计-模式识别与智能系统专业论文.docxVIP

内蒙古大学硕士学位论文基于ARM7的多路生理信号监护系统的设计 内蒙古大学硕士学位论文 基于ARM7的多路生理信号监护系统的设计 摘要 随着计算机技术和网络通信技术的高速发展，足不出户完成就医以不再是 新闻，远程诊断、自我保健正成为时尚，逐步走人人们的生活。因此对人体生 理信号准确、可靠的采集成为时下生物医学电子学的热点，人们对于有针对性 用途的便携式监护仪器的需求也更加迫切。 本课题中所设计的多路生理信号监护系统由两部分组成，分别是模拟部分 的信号采集电路，以及数字部分的数据处理系统。信号采集部分主要可以实时 采集人体的心电信号、脉搏信号和体温信号。将心电信号、脉搏信号经放大电 路、滤波电路处理后，得到具有诊断价值的人体信号，与由DS 18820所获得的 体温信号一同送到微控制器进行处理。 在数据处理系统中，选用了飞利浦公司的ARM7处理器LPC2138作为中央 处理器，完成本监护系统的控制任务。并对监护系统的数据实时显示、存储和 发送等相关功能模块进行了软硬件的设计。 经仿真与实际测量，系统运行良好，基本达到了预期目标，最后对所作工 作进行了总结与展望，提出了后续的完善与改进方向。 关键字： ARM7，心电信号，放大电路，实时显示，数据处理 内蒙古大学硕-l二学位论文THE 内蒙古大学硕-l二学位论文 THE DESIGN oF MUIJI．CHANNEL PHYSIoLoGICAL SIGNAL MoNIToRING SYSTEM BASED oN ARM7 ABSTRAC T Along with the rapid development of computer technology and network communication technology,it is no longer news that one completes medical treatments at home．Meanwhile remote diagnostics and self-care are becoming fashions，and they are into people’S lives step by step．Therefore it nowadays becomes a hotspot for biomedical electronics to accurately and reliably collect physiological signals．People also have more pressing needs to portable monitoring devices which have targeted and comprehensive use． The multi-channel physiological signal monitoring system of this paper contains two parts，which are signal collection circuits and data procession system．Data collection part is mainly about real time collection，such as body’S ECG,Pulse signal， Temperature signal etc．ECG and Pulse signals through amplify circuits and filter circuits that can get diagnostic body’signals，together with temperature signal collected by DS 1 8820 processed by MCU． In data processing system，Philips Electronics’LPC2 1 38 which belong to ARM7 内蒙古人学硕十学位论文processor 内蒙古人学硕十学位论文 processor was selected as central processing unit．which fulfills the task of this monitor system．The data of monitor system real—time display,save and send function model was designed at software and hardware side． After simulation and test，this system operates very well，almost achiev