厚板坯及超大圆坯连铸过程数值模拟研究-材料科学与工程专业论文.docxVIP

内蒙古 内蒙古科技大学硕士学位论文 III III decreasing the degree of superheat and increasing the distance of second cooling zone can promote the process of continuous casting, reducing the defect of the slab, improving the productive efficiency during the continuous casting process. Comparing the surface temperature between the calculated value and the actual date provided by the Wugang steel plant turns out that the calculated results is reasonably in good agreement with the on-site test data, and the relative error is less than 5％. The comparison between ?450 and ?600 round billet shows that continuous casting process parameters has a greater influence on the temperature field distribution and shell growth situation for ?600 super-large round billet. By taking some relative measures to control the temperature and cooling rate to control the high temperature solidification phase transformation and the proportion. And then the high temperature solidification microstructure can be reserved by quenching with ice water and salt at target temperature, meanwhile, the high temperature solidification phase transformation laws can be obtained by the later microstructure quantitative analysis. It largely enrich the research field blank on large size and easy to crack of heavy plate slab or super-large round billet, and it also provides an experimental apparatus to measure the solidification performance of steel materials which greatly enrich the laboratory measurement of solidification theory. It is of great significance in improving continuous casting process, reducing slab cracks and improving the slab quality. Key words：Continuous casting; Numerical simulation; High temperature solidification; Apparatus; Phase transformation laws PAGE PAGE 1 目 录 摘 要 I Abstract II 引 言 1 HYPERLINK \l _bookmark0 1 文献综述 2 HYPERLINK \l _bookmark1 1.1 连铸技术发展概况 2 HYPERLINK \l _bookmark2 1.1.1 连铸技术 2 HYPERLINK \l _bookmark3 1.1.2 国内连铸技术发展概况 2 HYPERLINK \l _bookmark4 1.1.3 国外连铸技术发展概况 3 HYPERLINK