连续刚构桥施工监控分析研究-桥梁与隧道工程专业论文.docxVIP

优秀毕业论文 精品参考文献资料 摘 摘 要 近年来，随着我国综合国力的提高和交通事业的迅速发展，相继修建了许多 预应力混凝土连续刚构桥，由于施工难度的增大，许多不容忽视的问题在施工过 程中也相继出现，其中在施工监控过程中挠度及应力的问题表现尤为突出。对预 应力混凝土连续刚构桥梁施工过程控制，是确保施工质量和安全的重要环节，是 确保成桥线形和应力状态符合设计要求的重要措施。悬臂浇筑挂篮施工的连续刚 构桥，施工监控主要依据结构的挠度、应力、温度等内容进行实时观测和修正模 型的结构参数，进行预测下一施工节段的挠度变形与结构应力，从而达到最终设 计状态、保证桥梁结构的成桥线形及应力满足设计要求。 本文结合AK4+240预应力混凝土连续刚构桥，对其进行施工监控中的应力进 行研究，主要内容和结果如下： 1、对连续刚构桥的特点与施工进行分析，并总结了国内外桥梁施工监控技术 的发展现状，指出桥梁施工监控的重要性及必要性。 2、从施工监控的目的、方法、原则等方面对施工监控理论进行概述，并对施 工监控的控制原理及关键问题进行分析 3、以AK4+240特大桥项目为背景，建立施工监控系统，运用桥梁博士软件 对桥梁的施工过程进行模拟分析，计算大桥在施工过程中和成桥运营中的内力和 应力。 4、结合验算结构，对大桥的施工过程实时监控，确保施工质量和安全，保障 应力、线形满足要求。 关键词：连续刚构桥施工监控仿真分析标高控制应力控制 万方数据 ABSTRACTIn ABSTRACT In recent years，with China’S comprehensive national strength and the rapid development of transport，have built a lot ofprestressed concrete continuous rigid一丘锄e bridge．Because the in crease of construction difficuky,therefore，in the construction process have also been many problems can not be ignored，construction monitoring which is particularly prominent deflection and stress．Prestressed concrete continuous rigid·firame bridge construction process control is to ensure the construction quality and safety,is to ensure that the stress state into the bridge line and an impoaant measure to meet the design requirements．The basket Cantilever continuous rigid-frame bridge construction,construction ofthe main basis fir monitoring the defection ofthe structure， stress，temperature，ete．in real-time observation and structural parameters of modified model to predict the next segment deflection ofthe construction and structure of stress， achieve the final design of the state to ensure the bridge structure into the bridge line and stress to meet the design requirements． In this paper,AK4+240 prestressed concrete continuous rigid frame bridge，its construction monitoring and stress research,the main contents and results are as f01loWS： 1．The structural features and Construction method of continuous rigid丘锄e bridge were analyzed and summarized the domestic a