不同工艺下Nb-Ti微合金钢组织演变和析出行为-Journalof.PDF

第33 卷第9期 东 北 大 学 学 报 ( 自 然 科 学 版 ) Vol33, No. 9 2 0 12 年 9 月 Journal of Northeastern U ni ersity( Natural Science) Sep. 2 0 1 2 Nb- Ti 徐 洋, 衣海龙, 孙明雪, 刘振宇 ( , 110819) : Gleeble 3800 Nb - T i : , , , , , 640 , ; 640 , 0 s , ; 100 s , , 140 MPa : ; ; Nb- T i ; ; : T G 113; T G 335. 5 : A : 1005-3026( 2012) 09- 1266-04 Microstructure Evolution and Precipitation Behavior of Nb-Ti Microalloyed Steel Under Different Processing X U Yang, YI H ai-long, S UN M ing-x ue, LI U Zhen-yu ( State Key Laboratory of Rolling and Automation, Northeastern Uni ersity , Shenyang 110819, China. Corresponding author : XU Yang, E-mail:@ 163. com) Abstract: The effects of different finish cooling temperature and holding time on microstructure, precipitation beha ior of Nb-Ti microalloyed steel w ere in estigated by using Gleeble 3800 thermal mechanical simulator, transmission electron microscope( TEM) and nanoindentation instruments. T he results show ed that with the increase of the finish cooling temperature, the size of ferrite and the fraction of pearlite increase, and the fraction of bainite reduces, the Vickers microhardness increases first then decreases and reaches the max imum w hen the finish cooling temperature is 640 . Rows of interphase precipitate and randomly dispersed precipitates can be found in ferrite matrix w hen the holding time is 0 s, and w hen the holding time is 100 s, the main precipitation is randomly dispersed precipitates. With the increase of the holding time, the nanoindentation is reduced 140 MPa.