内嵌式收油机油井油位动态控制机理和关键技术研究.PDFVIP

  • 1
  • 0
  • 约3.11万字
  • 约 6页
  • 2019-01-26 发布于湖北
  • 举报

内嵌式收油机油井油位动态控制机理和关键技术研究.PDF

35 10         工    Vol.35 No.10 2018年10 月 Journal of Mechanical & Electrical Engineering Oct. 2018 DOI:10.3969/ j.issn.1001-4551.2018.10.015 内嵌式收油机油井油位动态 控制机理及关键技术研究∗ 杨前明ꎬ李  浩 (山东科技大学 机械电子工程学院ꎬ山东 青岛266590) 摘要:针对内嵌式海面溢油回收装备的收油机油井油位动态控制问题ꎬ对动态斜面式收油机系统组成及工作原理进行了阐述ꎬ揭示 了油井油位与斜带马达及吸油泵马达转速之间的内在规律ꎮ 在提出油井油位动态检测方法的基础上ꎬ给出了吸油泵马达转速随油 井油位动态变化、泵速分段自动调节原理与实现方法ꎬ建立了吸油泵马达转速控制系统数学模型ꎬ运用Matlab/ Simulink仿真软件对 其转速控制系统进行了仿真分析ꎻ构建了实验测试系统ꎬ并且进行了测试验证ꎮ 研究结果表明:吸油泵马达转速控制系统响应速度 快ꎬ0.16 s后输出稳定ꎻ马达输出转速随油井油位分段自动调节ꎬ当油井油位处于不同区间时ꎬ吸油泵马达可自动调整其转速至650 r/ min、485 r/ min及320 r/ minꎻ实验测试结果验证了该油位动态控制方案的正确性ꎬ满足系统设计要求ꎮ 关键词:油井油位ꎻ动态调节ꎻ电液比例控制ꎻ数学模型ꎻ仿真分析 中图分类号:TH39ꎻTP271        文献标志码:A 文章编号:1001-4551(2018)10-1094-06 Dynamic control mechanism and key technology of oil level in oil well of embedded type oil recovery machine YANG Qian ̄mingꎬLI Hao (College of Mechanical and Electronic EngineeringꎬShandong University of Science and TechnologyꎬQingdao266590ꎬChina) Abstract:Aiming attheproblemof oillevelinoilwellofreceivingmachineforembeddedtypeoil spillrecovery equipmentdynamiccontrol ̄ lingꎬthe constitution andworking principleof the dynamic inclinedplanetypereceiving machinewere expoundedꎬthe inherent law between the oil level and the speed of the ramp motor and the oil suction pump motor was revealed. The principle and realization method of the oil suction pump motor rotating speedwhich changesdynamically andregulates segment automaticallywith oil levelweregivenꎬonbasisof pro ̄ posing method of dynamic detecting oil level . The mathematical model of the oil suction pump motor speed control system was establishe

文档评论(0)

1亿VIP精品文档

相关文档