基于层合叠加理论的CFRP多向层合板铣削力建模-中南大学学报.PDF

第 48 卷第 9 期 中南大学学报( 自然科学版) Vol.48 No.9 2017 年 9 月 Journal of Central South University (Science and Technology) Sep. 2017 DOI: 10.11817/j.issn.1672-7207.2017.09.014 基于层合叠加理论的CFRP 多向层合板铣削力建模 王福吉，朱浩杰，宿友亮，高汉卿，毕广健 (大连理工大学 机械工程学院，辽宁 大连，116023) 摘要：针对碳纤维增强树脂基复合材料(CFRP)多向层合板设计中常用的典型纤维铺层方向，实验研究 CFRP 单向 层合板的铣削力随纤维方向角及加工参数的变化规律，使用 BP 神经网络，获取不同加工参数下的 CFRP 4 种典 型铺层方向单向层合板铣削力数据；基于 BP 神经网络结果数据和切削力层合叠加理论，建立 CFRP 多向层合板 铣削力预测模型。研究结果表明：纤维方向角是影响铣削力的最主要的因素，该 CFRP 多向层合板铣削力预测模 型精度可以达到 85% 以上。 关键词：CFRP 多向层合板；切边精加工；铣削力预测；BP 神经网络；层合叠加理论 中图分类号：TB332 ；TG156 文献标志码：A 文章编号：1672−7207(2017)09−2352−11 Modeling about milling force for multidirectional CFRP based on theory of superposition WANG Fuji, ZHU Haojie, SU Youliang, GAO Hanqing, BI Guangjian (College of Mechanical Engineering, Dalian University of Technology, Dalian 116023, China) Abstract: Experiments were conducted to investigate the relationship between cutting parameters and cutting force of representative unidirectional CFRP. By using the back-propagation artificial neural network, the milling forces of the representative unidirectional CFRP were obtained. Based on the time-domain graph of unidirectional CFRP milling forces’ and the theory of superposition, a prediction model of multidirectional CFRP cutting forces was established and modified, and the verification experiments were conducted. The results show that the cutting angel is the most important factor to influence the milling forces. The prediction accuracy is above 85%. Key words: multidirectional CFRP; edge trimming; milling force prediction; BP neural networ