高温温度场彩色测量系统的设计工程热物理专业论文.docxVIP

中国科学技术大学硕士论文 中国科学技术大学硕士论文 摘要 Abstract Temperature is a very important parameter in scientific research and engineering field．The application of traditional method to contact type temperature measurement is limited in many situations because it’s sensors need touch the object directly．The most current non—contact radiation pyrometers by Planck law have not considered the changes of emissivity at different wavelength and the changes of special geometrical factors in measuring process．Therefore，the results ofthese pyrometers are“supposed temperature’’and can’t satisfy the requirements ofresearch． The Primary-Color Method of Temperature Measurement based on Planck law and Tricolor law has established a correspondence relation between the color and the temperature in high temperature field，and provided a new non—contact measure method for true temperature，theoretically Through creating the temperature variable database，the calculating speed ofinverting the color to temperature is increased． However the Primary—Color Method of Temperature Measurement system has the problem that the results Can’t cover the whole temperature field Combined with the CCD signal measuring process，the reason is analyzed Because of the limitation of taking the general civilian digital camera as the science detecting device，part of pixels values deviate the true value，then these pixels locate out ofthe theoretic region of temperature，and result in that the temperature values of these pixels Can’t be obtmned．In view ofthis phenomenon，a detailed process to modify the Primary—Color Method of Temperature Measurement software by image processing technology is proposed The general structure of the improved Primary-Color Method of Temperature Measurement System includes two processes：one is aimed at the pixels inside of theoretic temperature region and the other is aimed at the pixels outside of theoretic