基于CMM的渐开线圆柱齿轮误差评定方法研究-机械制造及其自动化专业论文.docxVIP

Abs Abstract I II The Research of Error Evaluating Method For Involute Cylindrical Gear Based on CMM Abstract Gear is the main parts of mechanical drive unit, and it has widely been used in mechanical and electrical products. With the development of automobile motorcycle manufacturing, aero and space technologies, shipbuilding industry, wind energy technology, communication, automation and control technology. The manufacturing technician of tiny and extra large gear, especially the detection of high precision gears has achieved a rapid development. At present, the traditional measuring instruments are mostly used to detect gears in the domestic enterprises of Gear processing and manufacturing. This measuring method is not only low inefficiency and workload, and is not suitable for the online measurement of mass gears for the special geometry of gear products. As a general measuring equipment of mechanical parts, the Coordinate Measuring Machine (CMM) has a level of popularity in domestic company. In spite of this, the calculate method and evaluating soft based on CMM are not mature enough. So, studying on the detection technology of gear errors based on CMM has been of great significance, which both in improving the detection precision and promoting the development of our country’s gear industry. As the fundamental gear, involute cylindrical gear has the advantage of steady transmission and low noise, which is most popular in the equipment of mechanical and electrical transmission. The thesis regards the involute as the object of research, and makes a research on the pitch and profile deviation of involute cylindrical gear error. The computing method of evaluating profile deviation for involute cylindrical gear is studied. The paper presents a detailed analysis of evaluating methods for profile deviation in recent years. Based on in-depth study，promoted the new method of evaluating profile deviation——Involute Slide. The mathematical model of tooth profile for invol