剪力墙厚度变化对井塔结构的抗震性能影响研究-结构工程专业论文.docxVIP

万方数据 万方数据 Subject : Research on Effect of Shear Wall Thickness Variation on Seismic Performance of Shaft Tower Structure Specialty : Structure Engineering Name : Han Hangbo (Signature) Instructor: Su Sanqing (Signature) ABSTRACT Well tower is an important industrial structure within the mine floor industrial sites, which is in the critical path connecting the upper and lower mine production processes. At present, more and more well tower structures are using reinforced concrete frame shear wall structures. Frame shear wall structure is recognized as a better ductility structure, although frame shear shaft tower is widely used in mining, but its seismic response characteristics remains to be studied. This paper studied well tower frame shear wall double symmetrical structure. In this paper, modeling based on the actual size of the well tower structure SAP2000 analysis software, analysis of the seismic response characteristics at different shear wall thicknesses and then analyzed. modal analysis is adopted in linear elastic stage, response spectrum analysis using pushover analysis of elastic-plastic stage. Four well tower models for modal analysis showed that the increase of the thickness of the shear wall in the case of other conditions do not change, which continues to reduce vibration period and reduces the magnitude smaller, and the models formation stiffness also increased stiffness model type vibration modes increases as the order increases. Linear elastic phase modal response spectrum analysis, the structure of the maximum floor displacement: X at 48.8m, Y at 26.6m, indicating the weak parts of the structure under the tower at the site. With the increase in the thickness of the floor, both the shear displacement and angular displacement has the layer decreases, indicating shear wall thickness increases with the strength of the weak parts of the shaft tower structure has been strengthened, and the overall strength of the shaft tower structure is also in