劲性骨架混凝土拱桥施工优化与稳定分析-桥梁与隧道工程专业论文.docxVIP

浙江大学硕士学位论文(2007) 浙江大学硕士学位论文(2007) 王业飞 摘要 Abstract The concrete arch bridge with stiff skeleton has the merits both of the CFST arch bridge and the concrete arch bridge．EspociMly，the self-spanning system during the construction brings much convenience．It brings a good choice for building arch bridge with larger span for the actualization of frog-leaping development． This paper presents a review the history and present state of the steel reinforced concrete，summarizes the present research condition on the steel reinforced concrete， Contrasts the design codes between different countries．expounds the steel reinforced concrete especially the concrete arch bridge with stiff skeleton using in the bridges． introduces the concept and classification of the stability in the arch bridge，also generalizes the research state on the concrete arch bridge with stiff skeleton． The paper introduces the basic concept and theory of the in-plane buckling and the lateral bucHing which are the two instability forms in the arch bridge，also the critical load formulas in different types of arch．The丘nitc element method using in the arch bridge stability is introduced briefly． Considering the physical circumstances of the Tinn·90ng Bridge as well as the construction ability of the bridge construction corporation，the main arch’s construction project，the side archs full flaming，and the main archs section are optimized．This leads to an obvious saving in the construction cost，all enhancement of the construction reliability and the increase of safety of the main arch during the construction．Much practicability and economy is achieved after optimization，as proved by the engineering practice． A computational modal using 3-D solid element is established basing on the Tinn—gong Bridge with ANSYS．The paper explores how to choose the element type．how to deal with the concrete arch bridge section with stiff skeleton，how to mesh the