基于MBD的数字化机加工艺设计及现场应用技术-航天工程专业论文.docxVIP

基于 基于 MBD 数字化机加工艺设计及现场应用技术 北华航天工业学院硕士学位论文 北华航天工业学院硕士学位论文 PAGE PAGE IV Abstract The paper describes the technology of MBD and outlines the historical background and development of the MBD technology.It mostly introduces the current development of application of MBD technology at home and abroad by comparison and prospects and inadequacies. The process of the design of the digital machining process based on MBD is analyzed and compared and the key technology of the field application is summarized and analyzed.At last, the main implementation scheme of machining process design and field application is proposed. Based on the process design of 3D model, the paper uses the design model to discard the card type paper process which is embedded in 3D image. Combined with the actual production process of the factory at present, the process is based on the 3D working procedure model, and the concrete content of the process is expressed by the method of the view on the basis of the 3D operation diagram. Specificly it realizes the Definition of process feature color display and view annotation feature in the 3D processing diagram. Then for the CNC machine tools, general machine tools, fitter, test specific operation are classified. NC machine tool through the 3D model and NC program to guide the production, general machine tools, inspection and fitter by 3D procedure model view are output, forming covering in the whole workshop various types based on the process design of the 3D model. Finally it was released to the workshop to guide production. Key Words: MBD Digital Process Design Process Model Field Visualization 目 录 摘 要 I HYPERLINK \l _bookmark0 Abstract II HYPERLINK \l _bookmark1 第 1 章 绪论 1 HYPERLINK \l _bookmark2 1.1 研究背景和意义 1 HYPERLINK \l _bookmark3 1.2 研究现状和发展趋势 3 HYPERLINK \l _bookmark4 1.3 课题的研究内容 5 HYPERLINK \l _bookmark5 第 2 章 基于 MBD 的数字化机加工艺设计过程分析 7 HYPERLINK \l _bookmark6 2.1 数字化机加工艺分析 7 HYPERLINK \l _bookmark7 2.1.1 机加工生产过程 7