胶印机高点闭牙机构的分析与优化研究-轻工技术与工程专业论文.docxVIP

摘要 摘要 万方数据 万方数据 I 西安理工大学硕士学位论文 西安理工大学硕士学位论文 II Ab Abstract Title: STUDY ON ANALYSIS AND OPTIMIZATION OF HIGH SPOT CLOSED GRIPPER MECHANISM OF OFFSET PRINTING MACHINE Major: Light Industry Technology and Engineering Name: Yuekun LlU Signature: μnkun L忧 Supervisor: P时 G叫hu CHENG 问nature:伽，外伽f Abstract The open-close gripper mechanism a typical mechanism of sheet-feed offset press， its kinematic and dynamic performance atfects printing speed and precision. The high spot closed gripper mechanism is a new form of open-close gripper mechanism ‘ it is essentially disk cam mechanism with roller follower. For the problem of high spot c10sed gripper mechanism of domestic offset press，such as unstable transition ， misregister and impact noisethis paper analyze and study the instance mechanism. )Based 011 parameter of i l1stance mechanism kinematic analysis and dynamic evaluation is carried out . Analysis of relative motion is carried out ‘ then analysis of abso lute motion is carried out ，k inematic characteristic vector is obtained. Accord ing to the model of force applied on mechanism ，dynamic characteristic is revealed Results indicate that: sudden change of angular acceleration of follower results in lmpact nOlse. Elast i c dynamic model is established taking elastic deformation of mechan i sm into account ，dynamic respol1se of gripper is solved; Studies ìndicate that: the force of gripper waves because of elastic deformation of mechanism ，gripper works unsteadily. Torsiona l deformation of shaft over a period of time is analysed using transient dynamic of ANSYS workbench 、studies indicate that: open and close consistency of 25 grippers is affected by repeated torsional deformation of shaft‘ the instability ofthe force of gripper is aggravated. Face up to the parameter selection prob lem ， study on optimization improvement is carried out. Results indicate tha t: impact noise is reduced greatly and