金属面绝热用夹芯板保温隔热和力学性能研究防灾减灾工程及防护工程专业论文.docxVIP

哈尔 哈尔滨工业大学工学硕士学位论文 - -II- Abstract As a new type of building materials，metal skinned insulating sandwich panel has been widely used in China in the past few years for its advandages，such as low density， good damping，vibration isolation，heat insulation，anti-fatigue，fire resistance， prefabricate and assemble easily，low maintenance costs. When Sandwich panel is used as building envelope，the connection between the sandwich panel panels impacts the coefficient of heat transfer for the effect of the heat bridge. In this paper，by the heat transfer experiments of sandwich panels with different core material under different connections，their corresponding heat transfer coefficient is gained，and then use the finite element analysis software ABAQUS to simulate the thermal properties of sandwich panels with different core material under different connections. then analyse the relevant thermal parameters and find that the connections C-shaped steel and rivets between the sandwich panels case a great influence on heat transfer coefficient，the formula of the influence of different sandwich panel connections of the heat transfer coefficient is proposed for design，verify against experimental results the experimental value，the value of finite element analysis and the value of a comparative analysis of the formula to verify the feasibility of the formula. Then introduce the insulation envelope of a basic form of evaluation system，analyse the relationship between the heat storage coefficient 、thermal inertia D and the physical parameters related of materials. At last，the mechanical performances of metal skinned rock wool sandwich panels are investigated by finite element analysis，simulate rockwool material as anisotropic material and isotropic material respectively and compare with the experimental data to validate the results of the analysis，find that there are little effect on the results of bearing capacity of rockwool sandwich，so w